The Device Manager connects the hardware of your studio, for example card readers at the entrance or at the counter, with the software, so that a card held to a reader checks a member in or opens a door. In this article you set it up step by step, from the Device Manager software on a Windows computer to the first connected reader and what to do when a device stops working.
Contents
- Overview
- Prerequisites
- How hardware is connected
- Install the Device Manager software
- Create a device manager
- Copy config and reset credentials
- Add a device
- Select the manual check-in device
- Device status
- Troubleshooting
- Check your knowledge
- Next in the Admin Academy
- Answers
Overview: from the Windows computer to the first connected reader
Before a reader can check members in, two things have to exist: the Device Manager software on a Windows computer in your studio, and a device manager in the software that this computer connects to. Steps 1 to 5 are set-up work that you do once per computer and once per device. Steps 6 and 7 help you in daily work. Each step is described in detail in the section named in it.
Step 1: Understand how hardware is connected. Readers are connected to a Windows computer, and the Device Manager software on it passes their data to the software. See How hardware is connected.
Step 2: Install the Device Manager software. You install it once on the computer to which your readers are connected. See Install the Device Manager software.
Step 3: Create a device manager and connect the computer. You create a device manager, copy the configuration address it generates and enter it in the Device Manager software. See Create a device manager.
Step 4: Retrieve the configuration again when you need it. For a new computer or a new set-up, you create a new configuration address. The old one stops working. See Copy config and reset credentials.
Step 5: Add your devices. For each reader you enter the description, model, task and connection type, then the connection details and options. See Add a device.
Step 6: Select the manual check-in device (optional). A reader at the counter can open the check-in dialog on the front desk computer. See Select the manual check-in device.
Step 7: Check the status and solve problems. Status badges show what is connected. If a device stops working, you reconnect it, check its settings or restart the services on the Windows computer. See Device status and Troubleshooting.
In the new navigation, Settings is under More in the sidebar on the left. Depending on your permissions and on how you customized the navigation, your sidebar can look different.
Prerequisites
For the steps in this article, your role needs the following permissions:
| Permission | What you need it for |
|---|---|
| Settings / Access control / Configure device manager | Open the Device Manager page, create, edit and remove device managers and devices, reset the credentials, activate and deactivate devices |
| Dashboard & Check-in / Check-in / Reconnect devices | Reconnect a device. This permission alone does not open the Device Manager page, which needs Configure device manager |
How hardware is connected
Your studio hardware, for example a card reader at the entrance or at the counter, is connected to a computer in the studio. On this computer runs the Device Manager software, a Windows application. It passes what the devices read to the software and sends commands from the software back to the devices, for example to open a door.
In the software, this computer is represented by a device manager. Every device belongs to one device manager. If devices are connected to different computers, each computer gets its own device manager.
You manage everything under Settings / Access control / Device Manager. The page shows one panel per device manager with its name, Last seen, status badge, three-dot menu and its devices.
The Device model list offers the supported readers and other devices (a limited set), and for each model only the connection types it supports can be selected.
Install the Device Manager software
The Device Manager software runs only on Windows, not on macOS or other operating systems. Install it on the Windows computer to which your devices are connected, once per computer.
- Download the installer of the Device Manager software on the Windows computer from https://download.magicline.com/devicemanager/latest.
- Run the installer and follow its steps until the installation is complete.
- Open the Device Manager software.
To connect it with your studio, you need the configuration address from the next section. You do not enter a user name or a password: the address contains what the Device Manager software needs to sign in.
Create a device manager
- Open Settings / Access control / Device Manager.
- At the top right, click New device manager.
- Enter a Name that tells your team where the computer is, for example "Front desk".
- Click Create.
Right after Create, the dialog Configure Windows Device manager opens with the configuration address that the software generated for this device manager.
- Click Copy.
- On the Windows computer, paste the address into the setup of the Device Manager software and save it there.
- Back in your browser, click Close.
Copy the address exactly as shown. It belongs to this one device manager, so do not share it outside your team.
Reload the Device Manager page. As soon as the Device Manager software has connected, the status of the device manager changes from Not Yet Connected to Active, and Last seen shows the time of the last contact.
The three-dot menu of a device manager offers Edit device manager, Remove device manager, Add device, Copy config and reset credentials and Logging. Edit device manager changes its name. Remove device manager deletes it permanently; if it still has devices that cannot be deleted, the software does not remove it.
Copy config and reset credentials
The configuration address is shown only when you create the device manager. If you need it again, for example because you replace the studio computer or set up the Device Manager software again, you create a new one.
- In the three-dot menu of the device manager, select Copy config and reset credentials.
- Read the warning and confirm with Save.
- In the dialog Configure Windows Device manager, click Copy and paste the new address into the Device Manager software.
Important: The reset deletes the old credentials. A computer that still uses the old address loses its connection, and its devices stop working until the new address is entered. That is why the software warns: "Do not continue if the device manager is working properly." Use the reset only to set up the device manager again or move it to another computer.
Add a device
Every device is added to the device manager of the computer it is connected to. The example is a card reader of the model GAT Writer 6000 F connected by USB.
- In the three-dot menu of the device manager, select Add device. The dialog opens on the page New device.
- Fill in the four fields described below and click Next.
- Go through the following pages with Next and click Create on the last page. When you edit an existing device, the last page shows Back and Save instead.
Page New device
- Device description: a name that tells your team which device it is, for example "Entrance reader".
- Device model: for example GAT Writer 6000 F.
- Task: what the device does, for example check members in at the entrance. The list shows only the tasks the model supports. The check-in tasks are covered earlier in the Admin Academy, in the article about check-in.
- Connection type: how the device is connected to the computer.
| Connection type | When to use it |
|---|---|
| COM | The device is connected to a serial port of the computer. |
| LAN | The device is connected through your network. |
| USB | The device is connected by USB and identified by its serial number. |
| USB (virtual COM-Port) | The device is connected by USB, and the computer addresses it through a COM port. |
| Device API | The device communicates through its own interface. The connection page is skipped. |
Page Configure device connection
The fields depend on the connection type. For several GAT Writer models, for example the GAT Writer 6000 F, you can choose USB or USB (virtual COM-Port):
- With USB, enter the Serial number of the device.
- With USB (virtual COM-Port), enter the COM port under which the computer addresses the device.
With USB, GAT Writers also offer Set locker expiration date at check-in/check-out and Master key for locker systems.
The pages Products and Service appear only for vending or service tasks.
Page Edit options
Which options appear depends on the task and the model. For a reader with the task Check In or Automated check-in/ out, you see:
| Option | What it does |
|---|---|
| Show device for card reading operations | Offers the device when someone reads a card in the software, for example to assign a card to a member. |
| Prevent multiple check-in for + Seconds | Ignores a second check-in of the same card within the seconds you enter. |
| Enable time tracking on check-in/check-out | Also records working time when employees check in or out at this device. |
| Enforce studio opening / closing hours for checkin | Accepts check-ins only within the opening hours of the studio. |
| Define individual opening / closing hours for device checkin | Sets opening hours for this device that differ from the studio. |
| Check-in text | A text for check-ins at this device. Only for the task Check In. |
| Emergency mode | Defines how the device behaves when the connection is lost or the system is under maintenance, and whether members are granted access. The value reads Deny access in case of missing connectivity. |
A device with the task Manual check-in/out shows only Show device for card reading operations and Emergency mode.
Click Create. The device appears under its device manager as Not Yet Connected. Reload the page: once the device is connected, its status changes to Active. To change a device later, select Edit device in its menu; the last button is then Save.
Select the manual check-in device
A reader at the counter can open the check-in dialog when a card is held to it, so your team decides whether to grant access. Available only if at least one active device has the Task Manual check-in/out.
- On the front desk computer, open the Check-in page.
- In the three-dot menu at the top right, select Select manual check-in device.
- Select the reader at this counter and click Confirm.
The choice is stored in the browser of this computer. Repeat it on every front desk computer and after you change the browser or clear its data. If no reader is chosen, the dialog shows No device set.
Device status
On the Device Manager page, every device manager and every device shows its status as a text badge:
| Status | What it means |
|---|---|
| Active | Connected and working. |
| Inactive | The connection is lost or not currently available. This is a connection state. |
| Not Yet Connected | Not connected yet, for example right after you created it, or the state is unknown. |
| Disabled | The device was deactivated in the software. This is separate from Inactive. |
Read the status from the top down. If the device manager is Inactive and Last seen is old, the problem is the Windows computer or the Device Manager software. If the device manager is Active but a device is not, the problem is that device or its connection.
The menu of a device offers Reconnect, Add data carrier configuration (on some devices), Deactivate device, Remove device and Edit device. Deactivate device switches a device off without deleting it, for example during a repair; its status is then Disabled. Activate device switches it on again.
Troubleshooting
If a reader does not react, start with the status on the Device Manager page and work through these checks in order.
1. Reconnect the device
- In the menu of the device, select Reconnect. The entry appears only for devices that support it.
- In the dialog Reconnect device?, confirm with Reconnect.
The software sends the command to the Device Manager software. Reload the page after a moment and check the status. At the front desk, employees without Configure device manager use Reconnect device in the three-dot menu of the Check-in page. Reconnecting needs its own permission, see Prerequisites.
2. Check the connection settings
If the device was unplugged, plugged into another port or the computer was replaced, open Edit device and check the page Configure device connection. With USB, the Serial number must match the device. With COM or USB (virtual COM-Port), the COM port must match the port under which the computer now addresses the device; correct it and click Save.
3. Restart the services on the Windows computer
If the device manager is Inactive, or devices stay inactive after reconnecting, restart the services of the Device Manager software instead of the whole computer. Open the Windows Services console as an administrator, restart each service that belongs to the Device Manager software, then reload the Device Manager page and check whether the status changes to Active.
4. Collect logs for support
If the problem stays, Logging in the three-dot menu of the device manager helps support analyze it. It is available only while the device manager is Active.
Check your knowledge
Answer the questions and compare your answers with the answers.
-
Your studio replaces the front desk computer and you installed the Device Manager software on the new one. How do you get the configuration address?
- You copy the address from the browser address bar of the Device Manager page.
- You select Copy config and reset credentials in the three-dot menu of the device manager.
- You create a second device manager with the same name.
-
A colleague uses Copy config and reset credentials on a device manager that works properly, just to look at the address. What happens to the connected computer?
- Nothing, the old address stays valid until the next restart.
- The computer receives the new address automatically.
- It loses its connection until the new address is entered in its Device Manager software.
-
A reader at the counter should open the check-in dialog, but the Check-in page does not offer Select manual check-in device. What do you check first?
- Whether the reader is active and has the Task Manual check-in/out.
- Whether the reader is connected by LAN.
- Whether the option Show device for card reading operations is enabled.
-
You add a GAT Writer with the connection type USB (virtual COM-Port). Which field do you fill in on the page Configure device connection?
- Serial number
- Master key
- COM port
-
Your front desk team should reconnect readers, but not change the device set-up. Which permission does their role need?
- Dashboard & Check-in / Check-in / Reconnect devices
- Settings / Access control / Configure device manager
- None, every employee can reconnect devices.
-
An hour after you created a device manager, its status is still Not Yet Connected. What is the most likely reason?
- No device has been added to it yet.
- The configuration address was not entered in the Device Manager software on the Windows computer.
- The name of the device manager is too long.
Next in the Admin Academy
Previous step: Reading reports and key figures: analytics dashboard, studio operating figures, member, revenue, class and appointment reports. This is the last article of the Admin Academy. You have now set up your studio in the software, from the first login to the connected hardware.
Answers
| Question | Answer | Explanation |
|---|---|---|
| 1 | B | The address is shown only when you create the device manager. Copy config and reset credentials creates a new one for the existing device manager, and its devices stay as they are. |
| 2 | C | The reset deletes the old credentials. The connected computer loses its connection until the new address is entered. |
| 3 | A | The entry appears only if at least one active device has the task Manual check-in/out. |
| 4 | C | With USB (virtual COM-Port) you enter the COM port. The Serial number belongs to the connection type USB. |
| 5 | A | Reconnecting has its own permission. Configure device manager would also allow the team to create, change and remove devices. |
| 6 | B | A device manager connects only after its configuration address was entered in the Device Manager software. Devices and the name have no influence on this. |
Note: This article was created with the help of artificial intelligence and editorially reviewed.