Classes are group sessions with a fixed time, a room and an instructor, which members book in advance, for example yoga, spinning or back fitness. In this article you set up classes step by step, from the first room to the first booking, including waiting lists and cancellations.
Contents
- Overview
- Prerequisites
- Set up locations
- Create a class
- Schedule classes
- Automated class cancellation
- Book members into classes
- Waiting lists
- Remove members and cancel classes
- Check your knowledge
- Next in the Admin Academy
- Answers
Overview: from the first room to the first booking
Before members can book a class, three things have to exist in the software: a room where the class takes place, the class itself and the concrete dates in the schedule. This is how they build on each other. The first three steps are set-up work that you do once. The last three steps you use in your daily work. Each step is described in detail in the section named in it.
Step 1: Set up your locations. Every class date takes place in a room, so you start with the rooms of your studio, for example "Course room 1" or "Spinning room". You group the rooms in location categories, for example "First floor", and you need at least one category before you can add a room. You do this once and only add new rooms when your studio changes. The details are in Set up locations.
Step 2: Create the class. A class is a template with the basic settings: the name, the color, the length of one date and the maximum number of participants. It also holds the number of places on the waiting list. A class does not appear in the schedule yet and members cannot book it. You find out how to create one in Create a class.
Step 3: Schedule the class. Now you turn the template into dates. You choose the instructor and the room, and you schedule a single date or a recurring series, for example every Monday and Wednesday for twelve weeks. You can also let the software cancel a date by itself if too few members have booked. From now on the dates appear in the class schedule and, if the class allows it, members can book them. See Schedule classes and Automated class cancellation.
Step 4: Book members into classes. Members book dates themselves, and you can book them as well, for example when someone asks at the front desk. You do this in the class schedule or in the member profile. See Book members into classes.
Step 5: Use the waiting list. Popular classes fill up. If you give the class a number of places on the waiting list, further members can queue for a full date, and the member who has waited longest moves up automatically when a spot becomes free. Without such a number, a full date simply refuses further bookings, so this step is optional but easy to forget. See Waiting lists.
Step 6: Handle changes. Plans change. You remove a single member from a date when the member cannot come, or you cancel dates when the class does not take place, and the software can inform the members. See Remove members and cancel classes.
In the new navigation, Classes and Communication are in the sidebar. Resources and Settings are under More in the sidebar on the left. Depending on your permissions and on how you customized the navigation, your sidebar can look different.
Prerequisites
For the steps in this article, your role needs the following permissions:
| Permission | What you need it for |
|---|---|
| Employees & Resources / Resources / Manage locations | Create, edit and delete locations and location categories |
| Settings / Services / Configure services/classes | Open Classes / Administration / Classes, create classes and change their settings |
| Calendar & Booking / Classes / Manage classes | Open the class schedule, schedule classes, extend a series, edit several class dates at once, add a stand-in and change the waiting list settings |
| Calendar & Booking / Classes / Book members for appointments | Book members into class dates |
| Calendar & Booking / Classes / Overwrite bookings for course | Move a member from the waiting list into the class with Book participant into appointment |
| Calendar & Booking / Classes / Canceling members for appointments | Remove a member from a class date with Mark participant as cancelled |
| Calendar & Booking / Classes / Cancel class appointment | Cancel a whole class date with Cancel Class |
| Communication / Manage automatic notifications | Set up the notification rules for waiting lists and cancellations |
Set up locations
Before you schedule classes, add the rooms where they take place. Locations are also used for appointments that need a room. Locations are grouped in location categories, for example "First floor" or "Wellness area". You need at least one location category before you can add a location.
If facility booking is active for your studio, you see Facility Zones and Facility categories under Resources / Locations instead of Overview.
Create a location category
- Open Resources / Locations / Overview.
- Click Creating a location category at the top right.
- Enter a Name for the category, for example "First floor".
- Click Save.
The category appears as a card on the page. As long as it has no locations, the card shows "No locations have been added to this location category so far."
Add a location
- On the card of the location category, click Add location. You also find Add location in the three-dot menu of the card.
- Enter the Name of the location, for example "Course room 1", and optionally a Description.
- Click Save.
The dialog has no field for the category. The location is added to the category of the card where you clicked Add location.
Edit or delete locations and categories
Open the three-dot menu of a location in its category card and select Edit location to change it, or Delete location to remove it. The three-dot menu of the card itself offers Edit location category and Delete location category.
Create a class
A class contains the settings that all its dates share. You create it once and then schedule it as often as you need. You edit the basic data later in the class details: open the three-dot menu next to the class name and select Edit Information. The three-dot menu of a row in the list offers only Delete.
- Open Classes / Administration / Classes. The list shows all classes of your studio.
- Click Create class at the top right. The panel Create class opens on the right.
- Fill in the fields (see table).
- Click Create at the bottom of the panel.
| Field | What you enter |
|---|---|
| Name | The name members see in the schedule, for example "Yoga" or "TRX". |
| Abbreviation | A short form of the name with a maximum of 3 characters, for example "YOG". |
| Color | The color of the class in the class schedule. It helps you to tell classes apart at a glance. You set it when you create the class. |
| Category | The category the class belongs to, for example "Mind & Body". It groups your classes. |
| Target group | Optional. One or more target groups, so that members find the right class. |
| Duration | How long one date of the class lasts, for example 45 minutes. |
| Description | A short text, so that members know what to expect. |
| Usage configuration | Optional. Limits how often a member can use the class, for example once per day. These limits apply in addition to contingents. |
| Online booking | Choose whether members can book the class online. In the class details, the setting is shown as Online booking approved. |
| Booking options | Bookable for free: members and leads can book without an included contingent or a ticket. Bookable: members book with an included contingent or a ticket offer, which you add in the tab Administration of the class details (see below). Setting up contingents and ticket offers is described in the next step of the Admin Academy. Not bookable (display only): the class only appears in the schedule and cannot be booked, for example for open training. |
| Tax rate | The tax rate of the class. |
| Number of participants | The maximum number of members per date. |
| Waiting list count | How many members can join the waiting list of a full date. The starting value comes from the card Template for new class dates under Classes / Administration / Settings. It is 0 unless you change it there, and 0 means the class has no waiting list. See the section Waiting lists below. |
| Planned participants (statistic only) | The number of participants you plan with. It is used for statistics only and does not limit bookings. |
Class details
Click a class in the list to open its details. They have three tabs:
- Scheduling: the dates of this class.
- Administration: prices and rules for booking, for example the Included contingent for members, which gives members the class free of charge through their rate or additional module, and ticket offers such as a 10 session ticket, which you add with Add ticket offer in the tile Ticket offers. The tile Booking & reversal conditions holds the rules for booking and cancellation, for example the reminder, the earliest and latest booking time and the cancellation deadline. The tile Restrictions holds the restrictions of the class.
- Online booking: how the class is offered for sale online. Selling paid classes online needs an online payment service in your studio.
Schedule classes
The Class schedule is the central place for all class dates of your studio. Here you schedule classes, see the bookings and edit single dates.
Step 1: Class, instructor and room
- Open Classes / Class scheduling / Class schedule.
- Click Schedule class at the top right. The dialog Scheduling opens. You also find Schedule class in the plus menu of the Appointments calendar.
- Select the Category first and then the Class. The list of classes depends on the category you chose.
- Select the Instructor and the Room. The rooms are the locations you set up under Resources / Locations.
- Under Appointment execution, choose whether the class takes place In the studio or as a Digital stream.
- Check the Number of participants, the Waiting list count and the Planned participants (statistic only). The values come from the class. If you change them here, they apply only to this series and the class itself stays unchanged.
- Optionally tick Activate automated class cancellation. See the section Automated class cancellation below.
- Click Next.
Step 2: Dates of the series
- Under Start of the appointment series, select the date of the first class.
- Under Period of the appointment series, enter for how many weeks the class runs, from 1 to 52 weeks.
- Optionally, in the participant reminder, enter under Remind before appointment how long before the date the members are reminded, in days, hours or minutes.
- Enter the start time for each weekday on which the class takes place, for example 18:00 on Monday and Wednesday. Leave the other days empty. There is no end time: it follows from the Duration of the class.
- Check the preview. It lists every date with the time, the instructor and the room.
- Click the button to create the dates. It shows the number of dates, for example Create 8 appointments.
For a single date, enter a period of 1 week and a time for one day only. The button then reads Create appointment.
Extend the series later
When a series is about to end and the class should continue, you do not have to schedule it again. In the class schedule, open the three-dot menu of the class and select Extend course series. The dialog Scheduling opens with the settings of the series already filled in. Check the start and the period, and create the new dates. The action is not available for cancelled series.
Tip: edit several class dates at once. In the three-dot menu of a class in the class schedule you change several dates in one step instead of opening each date: Edit instructor, Edit class room, Edit class time, Edit reminder and Edit automated class cancellation. Each action opens a dialog that lists the dates of the series, starting with the start date of the schedule. Nothing is preselected: tick the dates you want to change, and only those are changed.
The actions for additional participants work on a single date. With Add additional participants you add participants who did not book in the software, so that they count towards the capacity. Once there are any, the menu shows Edit additional participants and Delete additional participants.
Stand-in instructor
If the instructor of a date is ill or on holiday, add a stand-in. Click the date in the class schedule. The panel of the date opens on the right with the tabs Administration, Participant and History. In the tab Administration, click + Add Stand-In next to the instructor. The dialog Add Stand-In opens. Check Stand-In for, select the Employee who takes over and optionally a Reason, for example Illness or Vacation. Two toggles let you display the stand-in in the member platform and send members a notification about it there. Save. The date then shows the stand-in.
Automated class cancellation
A class with only one or two participants is often not worth running. With automated class cancellation, the software cancels a date by itself if not enough members have booked by a deadline. This saves you checking every date by hand.
- When you schedule a class, tick Activate automated class cancellation on the first page of the dialog Scheduling.
- Under Minimum participants, enter how many members must at least have booked.
- Under Deadline automated cancellation should take place, enter how long before the start the software checks the bookings. The deadline must be between 30 minutes and 7 days.
If fewer members than the minimum have booked at the deadline, the date is cancelled. The option is not available for classes with the booking option Not bookable (display only).
To change the setting for dates that already exist, open the panel of a date and change it in the tab Administration, or use Edit automated class cancellation in the three-dot menu of the class in the class schedule to change several dates at once.
Book members into classes
Members can book classes themselves online if the class allows it. You book a member yourself, for example, when they ask at the counter or by phone. There are three ways.
From the class schedule with Book appointment
- Open Classes / Class scheduling / Class schedule.
- Click Book appointment at the top right.
- Under Member, search for the member and select them.
- Under Class, select the class. The list below shows its dates with the columns Appointment, Instructor, Name of room and Participant. Select the date.
- Click Book appointments.
From the panel of a class date
- In the class schedule, click the date. The panel of the date opens on the right.
- In the tab Participant, type the member's name into the search field Add participant... and select the member.
The panel shows the booked members. If the date is full and has a waiting list, the member is added to the Waiting list instead, which is shown separately from the booked members.
From the member profile
- Open the member profile, tab Overview, and scroll to the appointments tile with the tabs Current appointments and Past appointments.
- Open the three-dot menu of the tile and select Book class. The dialog Book appointment opens with the member already selected.
- Under Class, select the class. The list below shows its dates with the columns Appointment, Instructor, Name of room and Participant. Select the date.
- Click Book appointments.
The booking then appears in the tab Current appointments of the tile and in Appointments / Appointment list of the member profile.
Waiting lists
Popular classes are often full. With a waiting list, members can queue for a full date. When a booked member cancels, a member from the waiting list can move up, so the spot does not stay empty.
Activate the waiting list for a class
A waiting list only works if the Waiting list count of the class is above 0. The default is 0. With 0, a full date simply refuses further bookings. To activate the waiting list:
- Open Classes / Administration / Classes and click the class to open its details.
- Click the three-dot menu next to the class name and select Edit Information. The dialog Edit class information opens. It also lets you change the Class name, the Appointment length (min.) and the Number of participants.
- Under Waiting list count, enter how many members can wait, for example 5.
- Click Save. In a setup with several studios, the button reads Save cross facility.
The value of the class is the starting value for every new series. When you schedule a class, you can also set the Waiting list count for a single series on the first page of the dialog Scheduling.
Add a member to the waiting list
Click the full date in the class schedule. In the panel on the right, search for the member with Add participant... and select them. Because the date is full, the member is added to the Waiting list.
Move a member up by hand
In the panel, point at a member on the waiting list and open the menu of the row. Select Book participant into appointment to book them into the date directly. Available only with the advanced booking features of your package.
Waiting list settings
How members move up is set for the whole studio under Classes / Administration / Settings. The page has these cards for the waiting list:
| Card | What you set there |
|---|---|
| Template for new class dates | The starting value of the Waiting list count for a class that has no value of its own yet, for example a new class. If it is 0, the card shows No waiting list. Classes and dates that already exist keep their own Waiting list count. You change it with Edit template in the three-dot menu of the card. |
| Waiting list settings | The Waitlist mode and the Latest time for participants to move up before the start of the appointment. You change both with Edit waiting list settings in the three-dot menu of the card. |
A third card, Further data, holds the setting Limit aggregator bookings for booking aggregators, which this article does not cover.
The Waitlist mode is The first person to wait will move up directly: when a spot becomes free, the member who has waited longest is booked automatically and receives a notification. The member does not have to do anything.
Members on the waiting list need some time to get to the class. The Latest time for participants to move up before the start of the appointment sets the limit: the default is 1 hour, so nobody moves up later than one hour before the class starts. If you set no limit, the card shows "Moving up possible until the beginning of the class".
Waiting list notifications
The software informs members about the waiting list with these notifications:
| Notification | When it is sent |
|---|---|
| Waiting list confirmation | The member was added to the waiting list. |
| Spot booked | The member moved up from the waiting list and is now booked. |
| No spot available | The date starts and the member is still on the waiting list, so they did not get a spot. |
You set up which of these notifications are sent under Communication / Notifications / Notification rules. Notification rules are covered in a later step of the Admin Academy.
Remove members and cancel classes
Decide first whether one member cannot attend or whether the whole date does not take place.
Remove one member from a class date
Use this when a member cancels but the class takes place.
- Open Classes / Class scheduling / Class schedule and click the date.
- In the panel on the right, open the tab Participant and find the member.
- Point at the member's row. A menu appears.
- Select Mark participant as cancelled.
The member is removed from the participant list and appears under Canceled participants. The action is available for booked members and for members on the waiting list. If the date has a waiting list, the member who has waited longest moves up automatically, as long as the class starts later than the latest move-up time. The software can inform the member with the notification Class participation cancellation.
Cancel class dates
Use this when the class does not take place, for example because the instructor is ill and there is no stand-in.
- Open Classes / Class scheduling / Class schedule.
- Open the three-dot menu of the class and select Cancel Class. A dialog lists the dates of the series, starting with the start date of the schedule. Nothing is preselected. You also find Cancel Class as a button in the panel of a date.
- Tick the dates that do not take place and confirm.
Each ticked date is cancelled for all its participants. The software can inform them with the notification Class cancellation. Cancel Class is offered for dates with the status planned. For other dates the menu shows Remove appointment instead. To remove cancelled dates from the schedule, select Delete canceled class series in the menu. It deletes only the cancelled dates of the series from the date you choose.
As with the waiting list notifications, you set up both cancellation notifications under Communication / Notifications / Notification rules.
Check your knowledge
Answer the questions and compare your answers with the answers.
-
Your studio opens a new spinning room. Where do you add it, so that you can schedule classes in it?
- Under Resources / Locations / Overview, with Add location in a location category
- Under Classes / Administration / Classes, with Create class
- Under Settings / Services / Services
-
Open training should appear in the class schedule, but members must not book it. Which booking option do you choose?
- Bookable for free
- Bookable, with an included contingent for all rates
- Not bookable (display only)
-
Where can you override the default number of participants for one class series without changing the class itself?
- In the class settings under Classes / Administration / Classes
- On the first page of the dialog Scheduling when you set up the series
- You cannot override it.
-
A yoga class should take place every Monday and Wednesday at 18:00 for the next 12 weeks. How do you schedule it?
- Schedule 24 single dates one after the other.
- Create the class twice, once for Monday and once for Wednesday.
- In the dialog Scheduling, enter 12 weeks as the Period of the appointment series and 18:00 for Monday and Wednesday.
-
A popular class series ends next week, and it should continue. What is the quickest way?
- Select Extend course series in the three-dot menu of the class in the class schedule.
- Create a new class with the same name.
- Change the Duration of the class.
-
A member wants to join a class date that is already full. How do you put them on the waiting list?
- Increase the number of participants of the date for a short time.
- Click the full date and add the member with Add participant... in the panel on the right. The member is placed on the Waiting list.
- Ask the member to try again later.
-
You try to add a member to a full date, but the software refuses the booking and no waiting list appears. What is the most likely reason?
- The member has not installed the member app.
- Waiting lists only work after the class has started.
- The Waiting list count of the class or series is 0.
-
A member calls to say they cannot come to tonight's class. The class still takes place. What do you do?
- Open the date, tab Participant, and select Mark participant as cancelled in the menu of the member's row.
- Select Cancel Class in the three-dot menu of the class.
- Delete the class series.
-
A class should be cancelled automatically if fewer than 4 members have booked 2 hours before it starts. How do you set this up?
- Set the Number of participants to 4.
- Tick Activate automated class cancellation, enter 4 as Minimum participants and a deadline of 2 hours.
- Set the Waiting list count to 4.
Next in the Admin Academy
Previous step: Turning leads into members: creating leads, the Sales Tool and offers. Next step: Managing appointments: services, calendar and bookings. In it, you you set up services, use the calendar and book appointments.
Answers
| Question | Answer | Explanation |
|---|---|---|
| 1 | A | Rooms are locations. You add them under Resources / Locations / Overview in a location category. They then appear as rooms when you schedule a class. |
| 2 | C | With Not bookable (display only), the class appears in the schedule but cannot be booked. Bookable for free would allow everyone to book, and Bookable classes are booked with a contingent or a ticket. |
| 3 | B | The Number of participants and the Waiting list count come from the class, but you can change them on the first page of the dialog Scheduling for this series only. |
| 4 | C | One series covers several weekdays. Enter the period in weeks and a start time for each weekday. The software creates all dates at once. |
| 5 | A | Extend course series opens the dialog Scheduling with the settings of the series filled in, so you only check the start and the period. |
| 6 | B | When the date is full and has a waiting list, a member you add in the panel is placed on the Waiting list. The panel shows booked members and the waiting list separately. |
| 7 | C | A waiting list only works if the Waiting list count is above 0. The default is 0, and then a full date refuses further bookings. |
| 8 | A | Mark participant as cancelled removes one member and keeps the date. Cancel Class would cancel the date for all participants. |
| 9 | B | Automated class cancellation checks the Minimum participants at the deadline, which can be between 30 minutes and 7 days before the start. The number of participants is the maximum, not the minimum. |
Note: This article was created with the help of artificial intelligence and editorially reviewed.