Appointments are individual sessions with a fixed length and the resources they need, for example personal training, nutritional advice or a massage, which you book for a member at a time that suits both sides. In this article you set up appointments step by step, from the first appointment-based service to the first booking in the calendar, including online sales and appointment-based check-in.
Contents
- Overview
- Prerequisites
- Service types
- Create an appointment-based service
- Make the service bookable
- Set up duration, resources and rules
- Simultaneous appointments
- Offer the service online
- The appointment calendar
- Book appointments
- Change an appointment
- Cancel appointments
- Appointment-based check-in
- Check your knowledge
- Next in the Admin Academy
- Answers
Overview: from the first service to the first appointment
Before you can book an appointment for a member, the software needs an appointment-based service: what the appointment is, how long it lasts, which employee, room or equipment it needs and how members pay for it. Steps 1 to 5 are set-up work that you do once per service and revisit only when your offer changes. Steps 6 and 7 are your daily work. Step 8 is optional. Each step is described in detail in the section named in it.
Step 1: Know the service types. The software knows four service types, and only the appointment-based service appears in the appointment calendar. A sauna visit, a solarium session or a day ticket are services of other types. Knowing the difference keeps you from choosing a type that cannot be booked the way you want. See Service types.
Step 2: Create the service. You create the service with Create Appointment-based service and fill in the basic data: the name, the category and the duration. See Create an appointment-based service.
Step 3: Make the service bookable. A service with the booking option Bookable cannot be booked until members have a way to get it: an included contingent in their rate, a ticket offer they buy or an online offer. See Make the service bookable.
Step 4: Set up duration, resources and rules. You define how the appointment works: preparation and follow-up time, the employee, room or equipment it needs, where it takes place and the rules for booking and cancelling. If one employee looks after several members at the same time, you also set up simultaneous appointments. See Set up duration, resources and rules and Simultaneous appointments.
Step 5: Offer the service online. If members should book or buy the service themselves, you allow online booking and create an online offer. Selling paid services online needs an online payment service in your studio. See Offer the service online.
Step 6: Work with the appointment calendar. The appointment calendar shows all appointments of your studio. You switch between day, week, month and list views and adjust the calendar to the way your team works. See The appointment calendar.
Step 7: Book, change and cancel appointments. You book appointments in the calendar or directly in the member profile. When plans change, you move the appointment to another time, employee or room, or you cancel it. See Book appointments, Change an appointment and Cancel appointments.
Step 8 (optional): Allow check-in for appointments. People who do not have a membership yet, for example a lead on a trial training, can check in for their appointment within a time window that you define. See Appointment-based check-in.
In the new navigation, Appointments and Classes are in the main sidebar. Resources and Settings are under More in the sidebar on the left.
Prerequisites
For the steps in this article, your role needs the following permissions:
| Permission | What you need it for |
|---|---|
| Settings / Services / Configure services/classes | Open Settings / Services / Services, create services and change their settings, contingents, ticket offers and online offers |
| Employees & Resources / Employee Management / Manage employee competences | Create employee competences and set the number of simultaneously bookable appointments |
| Calendar & Booking / Appointments / Appointment | Open the Appointments calendar and create appointments. Changing and cancelling appointments needs the right to edit, and deleting a cancelled appointment also needs the right to delete. |
| Calendar & Booking / Appointments / Book trial training | Create a trial training from the calendar |
| Member management / Administration / Book service usage | Use Book usage of service in the member profile |
| Settings / Access control / Configure appointment based check-ins | Set up appointment-based check-in |
Service types
Everything a member can use in your studio apart from classes and memberships is a service in the software: the sauna, the solarium, a day ticket or a personal training. Every service has a type, which you see in the column Type of the list under Settings / Services / Services. The type decides how the service is used and charged, and whether it can be booked in the appointment calendar.
| Type | How it works | Examples |
|---|---|---|
| Usage-based service | Number-based, without a fixed duration and without a time factor. Members use it spontaneously in the studio. The usage is booked on the member account by hand or automatically through a connected device. | Sauna, wellness area, showers, a drinks flat rate |
| Time-based service | Charged exactly to the minute, with no planning. It cannot be booked in advance. A connected device records the time used. | Solarium, parking barriers |
| Appointment-based service | Bookable, with a fixed duration and predictable resources such as an employee, a room or equipment. It is scheduled in the appointment calendar. | Trial training, personal training, nutritional advice, EMS training, massage |
| Check-in service | Regulates access to the studio and is number-based. It is charged when the member or lead checks in. | Day tickets, a 10-visit pass |
This article covers only the appointment-based service. The other three types are named so that you can tell them apart.
Create an appointment-based service
You create the service once and then use it for as many appointments as you need. You can change all settings later.
- Open Settings / Services / Services. The list shows all services of your studio with their type.
- Click Create Appointment-based service. The dialog Create Appointment-based service opens.
- Fill in the fields (see table).
- Click Create.
| Field | What you enter |
|---|---|
| Name | The name of the service, for example "Personal training 60 min". |
| Abbreviation | A short form of the name with a maximum of 3 characters, for example "PT". |
| Color | The color of the appointments of this service in the calendar. |
| Category | The service category, for example "Personal Training" or "Wellness". You use it to find the service when you book an appointment. |
| Target group | Optional. One or more target groups. |
| Duration | How long the appointment itself lasts, in minutes. You add preparation and follow-up time later. |
| Description | A short text, so that members know what to expect. |
| Documentation configuration | Optional. The documentation configuration used for appointments of this service. |
| Appointment goal | Optional. Assigns the service to one of your appointment goals for employees. |
| Usage configuration | Optional. Limits how often a member can use the service, for example once per day. These limits apply in addition to contingents. |
| Online booking | Enabled if members can book the service online, otherwise Disabled. In the service details, an enabled service shows Online booking approved: Yes. |
| Booking options | Bookable for free: members and leads can book without an included contingent or a ticket. Bookable: members book with an included contingent or a ticket offer, which you set up in the service details. |
| Booking codes | Optional. Groups items for your accounting, for example all rates and services of your swim school. A booking code takes effect only through a booking rule, see below the table. |
| Tax rate | The tax rate of the service, for example the regular VAT rate. You need it for the booking option Bookable. |
Booking codes and booking rules. You create booking codes under Settings / Finance / Booking codes. A code on its own changes nothing in your accounting exports. It takes effect through one booking rule, which posts the revenue of all items with the code to the revenue account you choose. To create the rule, open your configuration under Settings / Finance / Accounting configuration, go to the tab Booking rules, click Create booking rule and select Booking code as the Revenue category. When you add a new item later, you only assign the code and need no new rule. The exports show the numbers of the posting accounts, never the booking code, so give each booking code its own revenue account if you want to see its revenue in your accounting software.
After you click Create, the details of the new service open. They have two tabs: Administration, with the tiles you use in the next sections, and Online booking.
Make the service bookable
A service with the booking option Bookable needs a way for members to get it. As long as there is none, the service details show the warning "This service is currently not bookable. Please define at least one ticket offer, online offer or included contingent." You have three options, and you can combine them.
Included contingents and ticket offers are set up in the tiles Included contingent for members and Ticket offers in the tab Administration of the service details. Classes have the same two tiles and dialogs in their own tab Administration under Classes / Administration / Classes.
Included contingent: the service is part of a rate
Use an included contingent if members get the service through their rate, a rate code or an additional module, for example two personal training sessions per month in a premium rate.
- Open the service in Settings / Services / Services, tab Administration.
- In the tile Included contingent for members, click Add included contingent. The dialog Add included contingent opens.
- Under Volume, choose Flat if members can use the service without a limit, or Limited amount if they get a set number of uses.
- For Limited amount, enter under Usage per how many uses members get, and choose under Period whether this applies per Day, Week, Month or Year, for example 2 per month. Under Transfer of already utilized usages, choose No rollover or Transfer to next period. With Transfer to next period, unused uses carry over to the next period: with one use per week, a member who skips the first week can use the service twice in the second week. This choice is not offered for member codes.
- Under Period of use, choose One-time use, Fixed period with a number and the unit Minutes, Hours or Days, or Whole day.
- Under Applies to, choose what includes the service: Rates, Member codes, Additional modules, Rate codes or Aggregators. Then select the specific rate, code or module in the field below. For Rates, a further field lets you limit the contingent to certain terms or keep All terms.
- Under Allow future bookings without contingent, choose Activated or Deactivated.
- If your studio uses price categories, the dialog also shows Usable for price categories. Select the price categories there.
- Click Create.
Ticket offer: the service is sold separately
Use a ticket offer if members buy the service on its own, for example a single personal training or a 10 session ticket.
- In the tile Ticket offers, click Add ticket offer. The dialog Add ticket offer opens.
- Under Scope of usage, enter how many uses the ticket contains, for example 10 for a 10 session ticket, and under Price what the member pays for it.
- Under Period of use, choose One-time use, Fixed period or Whole day.
- Optionally enter an Item number.
- Under Validity, choose Unlimited validity, or Limit the validity of the ticket offer and then enter the Effective period as a number with the unit Day(s), Week(s), Month(s) or Year(s).
- Optionally, click ADVANCED SETTINGS and select one or more Booking codes for the ticket offer (see the field Booking codes in Create an appointment-based service).
- If your studio uses price categories, select them under Usable for price categories.
- Click Create.
Online offer: the service is sold online
An online offer is created in the tab Online booking. See the section Offer the service online below.
Set up duration, resources and rules
In the tab Administration of the service, the tile Appointment booking defines how much time the appointment blocks, what it needs and where it takes place. The software uses it to find out when an appointment is available.
Preparation and follow-up time
Open the three-dot menu of the tile Appointment booking and select Edit appointment booking. Enter the Preparation time, the length of the Appointment and the Follow-up time in minutes. The calendar blocks the total of all three, for example 10 minutes to prepare the room, 60 minutes of training and 5 minutes to clean up.
Resources
Resources are what the appointment needs: an employee, a room or a piece of equipment. If a required resource is not available, the appointment cannot be booked at that time.
- In the tile Appointment booking, click Add resource. You also find Add resource in the three-dot menu of the tile.
- Under Type, select Employees, Equipment or Location.
- Under Resource, select what the appointment needs. You can select a specific employee, room or device, or a whole group: for employees, a Competence, so that any employee with that competence can take the appointment; for rooms and equipment, a Category.
- Under Availability of the resource, choose whether the resource is needed for the whole appointment or only for part of it. If, for example, the trainer only needs the first 15 minutes of an EMS session, choose Resource is only needed for a certain duration and enter when the resource is needed, counted from the start of the appointment.
- Save.
Rooms are the locations you set up under Resources / Locations. If facility booking is active for your studio, you see Facility Zones and Facility categories there instead of Overview. Facility booking is not part of this article.
Appointment execution
In the three-dot menu of the tile, select Edit appointment execution and choose whether the appointment takes place In the studio or as a Digital stream.
Restrictions
In the tile Restrictions, you limit who can use the service and when: Facility restriction for specific studios, Age restriction for a minimum age and Opening hours category restriction for an opening hours category. With Add time restriction, you limit the service to certain days and times.
Booking & reversal conditions
In the tile Booking & reversal conditions, you set the rules for booking and cancelling. Each part has its own item in the three-dot menu of the tile:
- Edit booking conditions: the Earliest booking (before appointment), the Latest booking (before appointment) and the Max. future bookings a member can hold.
- Edit conditions for reversal: the Free cancellation deadline and the Cancellation behaviour, which decides whether a member can still cancel after the deadline and what happens to the contingent or ticket.
- Edit appointment reminder: how long before the appointment the member receives a reminder.
The tile also shows the No show configuration of the service.
Simultaneous appointments
By default, a resource can be booked for one appointment at a time. For employees, you change this on the employee competence, for example if your trainers supervise two EMS sessions side by side. Rooms and equipment always keep one appointment at a time.
- Open Resources / Employees / Employee competences.
- Click Create employee competence, or select Edit employee competence in the three-dot menu of an existing competence. The dialog of the same name opens.
- Enter the Name, for example "EMS trainer".
- Under Number of simultaneously bookable appointments, enter how many appointments one employee with this competence can have at the same time, for example 2. The minimum and the default is 1.
- Save. In the dialog Edit employee competence, the button is Save cross facility.
In the list, a competence with more than one simultaneous appointment shows the number, for example "5 simultaneous appointments possible".
For the setting to work, two more things must be in place:
- The employees who offer the service have the competence. You assign it in the employee profile: open the three-dot menu of the master data card, select Edit competence and choose the competence in the dialog Edit employee competence.
- The service requires the competence as a resource: in the tile Appointment booking, add a resource of the type Employees and select the competence.
When you book an appointment, the software counts the employee's other appointments that overlap with the new one:
- Only a real overlap counts: an appointment that ends exactly when the next one begins does not overlap. The time compared includes the preparation and follow-up time, unless the resource is needed only for a certain duration of the appointment.
- The limit applies per competence and per facility. If an overlapping appointment uses a different competence or takes place in a different facility, the employee is not available, whatever the number on the competence.
- If all overlapping appointments use the same competence in the same facility, the software allows the new appointment while their number is below the limit. With a limit of 2, the employee can take a second overlapping appointment, but not a third.
Offer the service online
Members can book and buy appointment-based services online if you allow it. You need two things.
Allow online booking
Set Online booking to Enabled when you create the service, or later when you edit the basic data of the service.
Create an online offer
- Open the service in Settings / Services / Services and go to the tab Online booking. Classes have the same tab under Classes / Administration / Classes.
- Check what members see. The area Information shows the Title, the Target groups, the Level and the Background image; you change them with Edit Information and Change background image in the three-dot menu of the area. The area Details shows the Description, which you change with Edit in its three-dot menu.
- In the card Online offer, which shows "No online offer has been created yet." as long as there is none, click Create online offer. The dialog Create online offer opens.
- Under Select language, choose the language, and enter the Membership name. Members see this name when they buy the offer and in their purchased contingents. It is required in the studio language, and you can enter it for each language.
- Enter the Scope of usage and the Selling price. The online price can differ from the price at the counter.
- Under Period of use, choose One-time use, Fixed period or Whole day.
- Optionally enter an Item number.
- Under Validity, choose Unlimited validity or Limited validity.
- Click Save.
Paid services need an online payment service. To sell paid services online, your studio needs an active online payment service, so that members can pay online, for example by credit card. At the top of the service details, the online payment status shows whether it is active in your studio. Services with the booking option Bookable for free do not need it.
The appointment calendar
The appointment calendar shows all appointments in your studio. Open it with Appointments in the sidebar.
Move around the calendar
- Click Today to jump to the current date, and use the arrows to move back and forward.
- Click the view button, which shows the current view, to switch between Day, Week, Month and List. The List view shows the appointments one below the other instead of on a time grid.
- The same menu offers views by resource: Locations, Equipment and Employees.
Configure the calendar
Click the button with the slider icon in the toolbar. The dialog Configure calendar opens. It has these settings:
| Area | Settings |
|---|---|
| General settings | Row height (per hour) (Normal or Half), Starting time (only full hours allowed) and End time (only full hours allowed) of the visible day, Color scheme (Light or Classic) and Reduce brightness of past events. |
| Advanced settings | Highlight opening hours, so that times outside your opening hours stand out, and Show icons. |
| Weekly overview | Week starts on, for example Monday or Sunday. |
| Employee view | Whether the employee view shows only employees who are available according to shift planning, working hours or appointments, whether the logged-in employee is shown first, whether a last column shows appointments without an employee, and whether working area names are displayed. |
Book appointments
Members can book online if the service allows it. You book an appointment yourself, for example when a member asks at the counter or by phone, in the calendar or in the member profile.
In the calendar
- Open Appointments.
- Click the plus button at the top right and select Create appointment. The dialog Create appointment opens.
- Enter the Eventname.
- Set the date, the Start time and the End time. The Duration is filled in from the service once you select it in step 7.
- Check the Appointment reminder and the Appointment execution, and optionally choose a Recurrence (None, Daily, Weekly or Monthly).
- If your organization has several studios, check the Facility.
- Select the Category and then the Service, for example "Personal training 60 min".
- Under Resources, check the employee, room or equipment. With Add resource you add more. The software tells you if a resource is not available at that time.
- Under Participants, search for the member. If the person is not in the software yet, create them with Create prospect.
- Click Save & Close, or Save & New to book the next appointment straight away. The dialog also offers Save & Continue.
The software checks whether the member is entitled to the service, for example through an included contingent or a ticket, and tells you if not. At the bottom of the dialog is the area Alternative appointments in CW, followed by the number of the calendar week.
The same plus menu also offers Create trial training, to book a trial training for a lead, and Schedule class. Create trial training is available only if the module Trial training is active for your studio.
In the member profile
- Open the member profile, tab Overview, and scroll to the appointments tile with the tabs Current appointments and Past appointments.
- Open the three-dot menu of the tile and select Book appointment.
- The dialog Create appointment opens with the member already under Participants. Fill it in as described above and click Save & Close.
The appointment then appears in the tab Current appointments of the tile and in Appointments / Appointment list of the member profile. The same three-dot menu also offers Book class.
Book usage of service is not an appointment. In the member profile, tab Overview, the three-dot menu of the services tile (tabs Active services and Inactive services) offers Book usage of service. It records that the member used a service, for example a sauna visit, with the Booking date and the Quantity. It does not reserve a time in the calendar or block an employee. For a personal training or a massage at a set time, use Book appointment or Create appointment.
Change an appointment
When a member wants another time or a different trainer has to step in, change the existing appointment instead of cancelling it and booking a new one. Both ways need the right to edit appointments.
In the calendar
Drag the appointment to another time to move it, or resize it to make it longer or shorter. If you drop the appointment onto another row of the same resource type, for example onto another employee in the employee view or onto another room, the appointment gets that employee or room instead. A drop onto a different resource type is undone. If the appointment is part of a series, the dialog Save date changes asks whether the change applies to the Individual appointment only or to All serial appointments.
In the appointment panel
Click the appointment in the calendar. The panel on the right has these tabs:
- Administration: the date and time with From and Until, the Recurrence, the Description, the color and the reminder.
- Participants: the members booked for the appointment. Here you add another member or remove one.
- Resources: the Service, the Category and the employee, room or equipment. With Add another resource you add more.
- History: the history of the appointment.
Make your changes and click Save changes. Before saving, the software checks the opening hours, the member's other appointments and whether the resources are available.
Notify the participants. If participants use the member app, you decide each time whether they receive a push notification about the change. When you drag an appointment, a dialog asks you to choose Do not notify or Notify. In the panel, you tick the notification to participants in the member app above Save changes. If no participant uses the member app, the software does not offer this choice.
Cancel appointments
When an appointment does not take place, cancel it, so that the time and the resources become free again. Cancelling needs the right to edit appointments.
- Open Appointments and click the appointment. The panel opens on the right.
- Click Cancel appointment. For a recurring appointment, you can also select Cancel serial appointment to cancel this appointment and all following appointments of the series.
- Confirm.
Cancel appointment is offered for planned appointments. Once you have set whether a participant took part, the appointment can no longer be cancelled. A cancelled appointment stays in the calendar with its status. To remove it, click it and select Delete appointment, or Delete serial appointment for the series. Deleting needs the right to delete appointments.
Appointment-based check-in
Members check in through their membership. People without a membership yet, for example a lead on a trial training or a guest who bought a single personal training, need another way in. With appointment-based check-in, you set individual check-in times for classes, trial training and services: the person can check in a set number of minutes before and after their appointment starts.
Available only with the advanced booking features of your package.
Create a configuration
- Open Settings / Access control / Appointment-based check-in.
- Click Create configuration. If your organization has several studios, select the studios it applies to.
- Enter a name and save. The details of the configuration open.
- In the three-dot menu of the tile Appointment-based check-in, select Edit appointment-based check-in. The dialog Edit appointment-based check-in opens.
- The dialog has three areas: Classes, Trial training and Services. For each area, choose Activated or Deactivated.
- For each activated area, two fields appear. Enter the minutes under Allow check-in minutes before appointment/class starts and Allow check-in minutes after appointment/class starts.
- Click Save.
In the configuration details, an area that is switched off shows Disabled.
Activate the configuration
A new configuration does not work until you activate it. Go back to Settings / Access control / Appointment-based check-in, open the menu of the configuration in the list and select Activate configuration. With Deactivate configuration you switch it off again.
If you use a QR code reader for check-in without staff, add the placeholder #QRCodeCustomer to your email templates, so that the person receives a QR code.
Check your knowledge
Answer the questions and compare your answers with the answers.
-
A colleague is sorting your offers into service types. Which pairing is correct?
- Time-based service: personal training with a trainer for 60 minutes
- Usage-based service: sauna, used spontaneously without a fixed duration
- Check-in service: solarium, charged by the minute
-
You want to offer personal training as a new service. How do you create it?
- Under Settings / Services / Services, click Create Appointment-based service and fill in the dialog.
- In the Appointments calendar, select Create appointment.
- Under Resources / Employees / Employee competences, click Create employee competence.
-
Each personal training needs 10 minutes to prepare the room and 5 minutes to clean up afterwards. How do you make sure the calendar blocks this time?
- In the tile Appointment booking, select Edit appointment booking and enter the Preparation and Follow-up time.
- Enter 75 minutes as the Duration and tell members the session is shorter.
- Set an Appointment reminder of 10 minutes.
-
Your EMS trainers supervise two members at the same time. How do you allow two simultaneous appointments per trainer?
- Set the Number of simultaneously bookable appointments of their employee competence to 2 and require that competence as a resource in the service.
- Create the EMS service twice.
- Add the same trainer twice as a resource in the service.
-
You created a service with the booking option Bookable, but the details say it is currently not bookable. What is missing?
- A color for the calendar
- At least one ticket offer, online offer or included contingent
- A description
-
You want to sell a paid 5-session personal training package online. What does your studio need in addition to the online offer?
- The booking option Bookable for free
- An appointment-based check-in configuration
- An active online payment service
-
Your team wants the calendar week to start on Sunday and the opening hours to stand out. Where do you set this?
- In the view menu of the calendar, with Month
- In the dialog Configure calendar, with Week starts on and Highlight opening hours
- Under Settings / Services / Services
-
A member at the counter wants a personal training next Tuesday at 18:00. You already have the member profile open. What do you do?
- In the three-dot menu of the services tile, select Book usage of service.
- In the three-dot menu of the appointments tile, select Book class.
- In the three-dot menu of the appointments tile, select Book appointment and fill in the dialog Create appointment.
-
A member asks to move tomorrow's personal training from 17:00 to 18:00, with the same trainer. What is the quickest way that keeps the participant and the trainer?
- Cancel the appointment and book a completely new one at 18:00.
- Drag the appointment to 18:00 in the calendar, or change From and Until in the panel and click Save changes.
- In the member profile, select Book usage of service for 18:00.
-
A lead booked a trial training and should be able to check in up to 15 minutes before it starts. How do you set this up?
- Create a Check-in service.
- Set an Appointment reminder of 15 minutes for the trial training.
- Under Settings / Access control / Appointment-based check-in, activate Trial training with 15 minutes before the start, and activate the configuration.
Next in the Admin Academy
Previous step: Managing classes: locations, scheduling, booking and waiting lists. Next step: Communicating with your members: messages, templates and designs. In it, you you send messages to your members with templates and designs.
Answers
| Question | Answer | Explanation |
|---|---|---|
| 1 | B | A usage-based service such as the sauna is number-based and used spontaneously, without a fixed duration. Personal training is an appointment-based service, and a solarium charged by the minute is a time-based service. |
| 2 | A | Create Appointment-based service opens the dialog in which you enter the basic data of the new service. Create appointment books an appointment for a service that already exists, and an employee competence describes what employees can do, not the service. |
| 3 | A | The calendar blocks the total of Preparation, Appointment and Follow-up. A longer duration would show members the wrong session length. |
| 4 | A | Simultaneous appointments are set on the employee competence. The service must require that competence as an employee resource, and the trainers must have the competence. |
| 5 | B | A service with the booking option Bookable needs at least one way for members to get it: a ticket offer, an online offer or an included contingent. |
| 6 | C | Paid services can only be sold online with an active online payment service in your studio. The status at the top of the service details shows whether it is active. |
| 7 | B | Week starts on and Highlight opening hours are in the dialog Configure calendar, which you open with the slider icon in the calendar toolbar. |
| 8 | C | Book appointment opens Create appointment with the member already selected and reserves the time and the trainer. Book usage of service only records a usage and does not reserve a time. |
| 9 | B | Changing the existing appointment is quicker than cancelling and booking again: moving it in the calendar or changing the time in the panel keeps the participant and the trainer. If the member uses the member app, you also decide whether they receive a notification. |
| 10 | C | Appointment-based check-in lets people without a membership check in within a time window around their appointment. It works only after you activate the configuration. |
Note: This article was created with the help of artificial intelligence and editorially reviewed.