With the communication tools of the software, you reach your members by email, text message, letter or app message, one member at a time or many members at once, for example with a newsletter or a birthday greeting. In this article you set up your communication step by step, from the Communication center and its channels to your own templates and designs.
Contents
- Overview
- Prerequisites
- The Communication center and its tabs
- Channels, activation and costs
- Write a single message
- Send serial messages
- Templates and placeholders
- Designs
- Check your knowledge
- Next in the Admin Academy
- Answers
Overview: from the first message to your own templates
Every email or letter is built from three parts: the channel that delivers it, the template that holds the text and the design that gives it its look. Text and app messages use only a channel and a template. Channels have to be active before you can use them. Templates and designs are prepared once and reused: the software brings system versions along, and you add your own. Writing messages and checking what happened to them is your daily work. Each step is described in detail in the section named in it.
Step 1: Get to know the Communication center. The Communication center is the overview of all single messages to your members. Like an email inbox, it sorts them into tabs: sent messages, messages waiting for dispatch, drafts, archived messages and messages with errors. Here you also see what each message cost. See The Communication center and its tabs.
Step 2: Check which channels are active. The software sends emails, text messages, letters and app messages, but each channel has to be active for your studio. If a channel is missing, the software tells you so and leads you to the Marketplace. Before you plan a campaign, also check what a channel costs: emails and text messages can be charged per message, depending on your contract. See Channels, activation and costs.
Step 3: Write a single message. When you want to reach one member, for example to answer a question or to confirm an agreement, you write a single message. You choose the member, a template and a category, adjust the text and send it immediately or save it as a draft. See Write a single message.
Step 4: Send a serial message. When many members should receive the same message, for example a newsletter or information about new opening hours, you send a serial message. The recipients come from a saved member filter list, and the software creates one personal message for each member. Serial messages are the only messages you can schedule for a later time. See Send serial messages.
Step 5: Use and create templates. Every message starts from a template. System templates cover the everyday cases, for example the confirmation of a cancellation. You create your own templates for your studio's messages and personalize them with placeholders such as the member's first name. See Templates and placeholders.
Step 6: Design your messages. A design is the stationery of your emails and letters: the frame with your colors, your logo and the footer. You choose one of the existing designs or add your own. This step is optional: the system designs work without any changes. See Designs.
Step 7: Keep an eye on sent messages and errors. After sending, check the Communication center from time to time. The tab with errors shows the messages that did not reach the member, for example because an email address is missing, so that you can correct the data and send the message again. See The Communication center and its tabs.
In the new navigation, Communication and Members are in the sidebar. Depending on your permissions and on how you customized the navigation, your sidebar can look different.
Prerequisites
For the steps in this article, your role needs the following permissions:
| Permission | What you need it for |
|---|---|
| Member management / Marketing & Communication / Manage messages | Open the Communication center, write, send, edit, archive and delete single messages, and send or delete serial messages |
| Communication / Manage message templates | Open Communication / Administration / Templates, create, edit, reset and delete templates. The read right also opens Communication / Messages / Serial messages |
| Communication / Manage message designs | Open Communication / Administration / Designs, create, edit and delete designs |
| Communication / Download communication email | Download a sent email with Download as PDF |
The Communication center and its tabs
The Communication center shows every single message that the software created for your members, whether you wrote it yourself or a notification rule created it. Open Communication / Communication center / Overview. At the top you find the buttons to write a new message, Create letter, Create email, Create text message and Create App message, and below them the messages in five tabs.
| Tab | What it holds |
|---|---|
| Sent | The messages that left the software, with the time they were sent. The status shows how far a message got, for example Read or Received. The software opens this tab first. |
| Outbox | Messages that are accepted and wait for dispatch. Normally they stay here only for a short time. |
| Drafts | Messages you saved with Save draft and have not sent yet. The tab shows the number of drafts in brackets. A letter that you mark as sent moves to Sent, it does not stay here. |
| Archive | Messages you archived, and cancelled messages. Archiving is manual: the software does not move messages here by itself. |
| Errors | Messages that could not be created or delivered, for example because the member has no valid email address or mobile number, opted out of the channel or category, or because the provider declined the message. The tab shows the number of errors in brackets. |
The tabs list single messages only. Serial messages have their own page, see the section Send serial messages below.
Columns and costs
Each row shows the subject and the member, the Status, the Type of the message, for example email or letter, the Price and the Time. The price is the cost of this message for your studio, for example 0.00 EUR for an email that costs nothing under your contract, or the price of a letter, which depends on the number of pages and the printing. In the tab Drafts the column Price is not shown, because a draft has not caused any cost yet.
Actions on one message
Open the three-dot menu at the end of a row to work with one message. In the tab Sent, an email offers these actions:
- Preview message: shows the message as the member received it.
- Download as PDF: saves the email as a PDF file, for example as proof of what you sent. Available only for emails that were read or received, and only with the permission Download communication email.
- Archive message: moves the message to the tab Archive.
Other tabs and types offer further actions, for example Edit message, Send message and Delete message for drafts, or Mark as sent for letters.
Actions on several messages
To clean up a long list, tick the checkboxes of several rows. A counter, for example "1 message selected", and the action for the tab appear above the list:
- In the tabs Sent and Errors, Archive messages moves all selected messages to the archive.
- In the tab Drafts, Delete messages deletes all selected drafts. Deleted drafts cannot be restored.
Work through the errors
Check the tab Errors regularly, especially after a serial message or a notification rule has sent many messages. The status of each row tells you why the message failed, for example Sending error, Insufficient data or Opted out. Correct the cause first, for example add the missing email address in the member's profile, and then write the message again. If a member opted out, respect the decision.
Channels, activation and costs
The software sends messages on four channels: email, text message, letter and app message. Which of them you can use depends on what is active for your studio.
Activate a channel
Emails and text messages are apps in the Marketplace. If you click Create email or Create text message while the app is not active, the dialog Please activate this app opens with the text "For the selected function an app is required" and a card for the app, for example Business text messages. Click To the Marketplace to open the app in the Marketplace and activate it there, or Cancel to close the dialog. The same dialog opens when you create a text message template or a serial text message without an active app. A text message app can also be in review for a short time after activation, before you can send.
Emails are the most common channel. Whether an email costs anything depends on your contract: if your studio has a usage-based email subscription, each email is charged, and without such a subscription emails are free of charge. The column Price in the Communication center shows what each message cost.
Text message
Text messages reach members quickly, for example for a cancelled class or a payment reminder. They are charged per message, and the length decides how many messages are charged:
- A text with standard characters fits into one message up to 160 characters. A longer text is split into parts of 153 characters each.
- A text with special characters, for example letters outside the standard set, is sent as Unicode. Then one message holds 70 characters, and a longer text is split into parts of 67 characters.
- Some characters, for example €, [ or ], count twice.
The editor shows how many messages your text needs, so you see the cost before you send. Emojis are blocked, because telephone providers reject them.
Letter
Letters are printed, folded, put into envelopes and posted for you. Available only if the letter feature is active for your studio. When you send, the software checks whether the letter service is active. The costs of letters are invoiced with your monthly costs.
App message
With Create App message you send a message into the member's app on the Member Platform, optionally with a push notification. Available only with the member app in your package, and only for members who connected the app. App messages are covered in a later module of the Admin Academy.
Write a single message
A single message goes to exactly one member. You write it from the Communication center or from the member's profile, tab Messages, which offers the same four buttons. Single messages are sent immediately: they cannot be scheduled for a later time. If you want to send later, save a draft and send it yourself, or use a serial message.
Write an email
- Open Communication / Communication center / Overview and click Create email. The dialog Create email opens.
- Under To, search for the member and select them.
- Select a Template. The template fills in the subject and the text. Choose the template that is closest to what you want to say, then adjust it.
- Select the Category, for example Membership, General, Appointment or Newsletter. The category tells the software what the message is about, which matters for the member's contact preferences (see below).
- Check the Subject. You can insert placeholders here by typing #.
- Select the Design, for example Modern or Default.
- Check the text in the editor and adjust it. Type # to insert a placeholder, for example the member's first name. From shows the sender address of your studio. You cannot change it here.
- Switch on Preview at the bottom of the dialog to see the email as the member will receive it, with the placeholders filled in.
- Click Send to send the email now, or Save draft to keep it in the tab Drafts and send it later.
Write a text message
Click Create text message. The dialog works like the email dialog: you select the member under To, a Template and a Category, and write the text. Instead of a subject, a text message has an Internal subject, which only you see in the Communication center. The member does not receive it. You insert placeholders with the placeholder menu above the text, and the preview shows how many messages the text needs. The sender name of your studio is shown as the sender. It can have up to 11 letters, numbers or spaces. If the member has no valid mobile number, the dialog shows "No valid mobile number for text messages". Links in the text cause a warning only, emojis block sending.
Write a letter
Click Create letter. Enter a Name for the letter, search for the member, select the template and the Category, and adjust the text. Send the letter with Send immediately and binding: the order is binding and the letter goes to print. If you print and post a letter yourself, select Mark as sent in its menu, so that it appears in the tab Sent.
When the member does not want to be contacted
Members decide on which channels and for which topics they want to hear from your studio. The software checks this for each message against its Category. If the member opted out, the dialog shows a warning such as "This member does not want to be contacted by text message for category Newsletter", and a message sent anyway ends up in the tab Errors with the status Opted out. So choose the category that really fits the content: a promotion is not a membership message.
Send serial messages
A serial message sends the same content to many members at once, for example a newsletter or an invitation to a studio event. The software creates a personal message for each member, with the placeholders filled in. Serial messages have their own page and do not appear in the tabs of the Communication center.
The recipients come from saved member filter lists, which you create under Members / Member filter lists, for example "All active members". How to build them is described in the next step of the Admin Academy.
The serial messages page
Open Communication / Messages / Serial messages. The list shows all serial messages with the columns Name, Status, Type, Price, Recipient, Generation error and Sent date. With Filter, Columns and Sort you narrow down and arrange the list. The status shows where a serial message stands, for example Draft, Created, Generated or Ordered. The column Generation error shows for how many members the software could not create the message, for example because data for a placeholder is missing.
At the top right you find Create serial email. The buttons for the other channels, Create serial text message, Create serial letter and Create serial App message, appear only if the channel is active for your studio.
Dunning runs also create serial messages. The software creates them automatically, already assigned to the members of the run, so you only check and send them.
Create a serial email
- Click Create serial email. A dialog with two steps opens: Create serial email and Select customers.
- Enter a Name. Only you see it in the list, so choose a name you recognize later, for example "Newsletter March".
- Under Recipient list, select one or more member filter lists.
- Select the Template. You can use system templates and your own templates.
- Click Next. The step Select customers opens with two tabs, All members and Problem cases, each with the number of members. The table shows the Name and the Contact of each member. For a member with a problem, the column Contact shows the reason in red, for example Invalid email address or No email address.
- Tick the members who should receive the email. Save stays grayed out as long as no member is selected. Click Save. With Back you return to the first step, and Cancel closes the dialog without saving.
- The serial message appears in the list. Open it to check it, and send it with Send. For a serial letter, the button says Send immediately and binding and the dialog shows the Total cost first.
After sending, the software creates the messages one by one. Members for whom a message could not be created are counted under Generation error. With Resend messages with dispatch errors in the menu of the serial message, you send the failed messages again after you corrected the data. With Delete message you delete a serial message.
Schedule the dispatch
Serial messages can go out at a later time, for example a newsletter on Friday morning at 8:00, without you being at the computer. Single messages cannot be scheduled.
- Open the serial message in the list. You can schedule a serial message in the status Draft.
- On the detail page, click the arrow next to the button Send and select Schedule sending.
- The dialog Schedule sending opens. Under Select date and time, enter when the message should go out, in the format DD/MM/YYYY hh:mm.
- Click Save. The serial message is sent at that time.
You set the time in steps of 15 minutes, and it cannot be in the past. A scheduled serial message gets the status Scheduled. To change the time, select Edit schedule in the menu of the serial message. To stop the dispatch, select Cancel schedule. The software asks "Delete the draft message afterwards?": tick it only if you no longer need the message.
Templates and placeholders
A template holds the text, the category and, for emails, the subject and the design. Good templates save time and keep the tone of all employees consistent.
Open Communication / Administration / Templates. The list shows the templates of the studio you selected under Current facility, with the name, the Category, the type and the number of facilities that use the template. With the type filters Letter, Email, Text message and App you show one channel only.
System templates and your own templates
- System templates come with the software and are used for everyday actions, for example the confirmation of a cancellation, an idle period confirmation, a dunning letter or the information about a returned direct debit. They carry the badge System template. You can change their content with Edit template content, but you cannot delete them. If a change went wrong, Reset template changes brings back the original text.
- Your own templates are the ones you create, for example for a newsletter or a welcome message. You change them with Edit template content and delete them at any time with Delete template.
You find these actions in the three-dot menu at the end of the template's row.
Create an email template
- Open Communication / Administration / Templates and click Create email template.
- Under "How do you want to create your template?", select Standard template to start from an empty template, or one of the presets for a specific event. Click Next.
- Check Current facility. With Edit sharing settings you decide which of your studios can use the template.
- Enter the Name. The name is only for you and your colleagues, so that you find the template in the list, for example "Newsletter monthly".
- Select the Design and the Category.
- Optionally, select Additional member information. Leave it empty for a general message, such as a newsletter. Choose a topic, for example a membership, only if the template refers to specific data of the member. You cannot change this field after the template is created.
- Enter the Subject. This is the subject line the member sees. It is a separate field from the name.
- Write the text in the editor. Use the toolbar to format the text and to insert links, and the last icon to attach a file.
- Click Save.
Templates in several languages
If your members speak different languages, you can keep one template with a text for each language of your studio. Use Select language at the top of the template, for example to switch between German (DE) and English (US), and write the text for each language. This works for email and text message templates.
Create a text message template
Click Create text message template. The template has a Name, a Category, the optional Additional member information and the message text with a placeholder menu. It has no subject. Keep the length rules from the section Channels, activation and costs in mind.
Placeholders
Placeholders insert data from the member's profile or from your studio, so that each member receives a personal message. In the editor and in the subject, type #: a list of placeholders opens. Keep typing to narrow it down, and select the placeholder. In the text it appears with a leading #, for example #FirstName, and the software replaces it with the member's data when the message is created.
| Placeholder | What it inserts |
|---|---|
| #SalutationFormal | A formal greeting that depends on the member's gender, for example "Dear Mr", "Dear Mrs" or "Hello". |
| #SalutationInformal | An informal greeting, for example "Dear". |
| #FirstName, #LastName | The member's first and last name. |
| #CustomerMembershipNumber | The member's membership number. |
| #Birthday, #Email, #Street, #City | Personal, contact and address data of the member. |
| #CurrentDate | Today's date. Once a letter is sent, the date is stored with it. |
| #QRCodeCustomer | A QR code for the member, for example for the check-in. Using it at the entrance needs matching hardware in your studio. |
| #StudioName, #StudioEmail, #StudioPhoneNumber | Data of your studio. |
Placeholders that need data from a specific event, for example the end date of a cancellation, the dates of an idle period or the amount of a returned direct debit, are only available if you selected the matching Additional member information in the template.
Designs
A design is the stationery of your messages: for an email the frame around the text with your colors, logo and footer, for a letter the letterhead. You choose the design in the template or when you write a message, so the same text can appear in your everyday design or, for example, in a birthday design.
Open Communication / Administration / Designs. The page lists the existing designs, for example Modern and Default for emails and the business letter designs for letters. Each row shows the name, the type, email or letter, and the number of facilities that use the design. System designs cannot be changed or deleted. Your own designs open when you click them, and you remove them with Delete design.
Create an email design
An email design is HTML code. You usually get it from your agency or the person who looks after your website.
- Click Creating an email design. The dialog Create design opens.
- Check Current facility and, with Edit sharing settings, which studios can use the design.
- Enter a Name, for example "Christmas".
- Paste the HTML code into Design code. The code must contain two placeholders: ${content.content} marks where the text of the message goes, and ${footer.unsubscribeLink} adds the link with which the member unsubscribes. The unsubscribe link is required in every email.
- Click Save.
The software checks both placeholders before saving. If one of them is missing, it does not save the design and shows "Required placeholders missing." The new design is then available under Design in your email templates and in the dialog Create email.
Create a letter design
Available only if the letter feature is active for your studio. Click Create letter design, enter a Name and choose under Print additional content what appears in the letterhead: Display studio address in letter head, Display customer number in letter head, Display date above the subject and Display letter return barcode in letter head. With Letter page 1 as PDF and Letter page 2 as PDF you upload your stationery as a PDF file, for the first page and for the following pages. Click Save.
Check your knowledge
Answer the questions and compare your answers with the answers.
-
A member says they never received the confirmation email you sent yesterday. Where do you look first?
- In the tab Drafts of the Communication center
- In the tab Errors of the Communication center, where the status shows why a message failed
- Under Communication / Administration / Designs
-
Yesterday you wrote an email to a member and clicked Save draft. Where do you find it today?
- In the tab Outbox
- In the tab Archive
- In the tab Drafts
-
Your manager asks whether the emails of your studio cost anything. What is correct?
- It depends on the contract. The column Price shows the cost of each message.
- Emails are always free of charge.
- Emails cost the same as text messages.
-
You write a text message of 200 characters using only standard characters. How many messages does the text need?
- 1
- 3
- 2
-
You click Create text message and the dialog Please activate this app opens. What does it mean?
- The member has no mobile number.
- The text message app is not active for your studio. You activate it in the Marketplace with To the Marketplace.
- Your role lacks the permission to write messages.
-
A newsletter template should greet each member formally, depending on their gender. Which placeholder do you use?
- #SalutationFormal
- #FirstName
- #SalutationInformal
-
A colleague changed the system template for the cancellation confirmation, and the text is now wrong. How do you get the original text back?
- Delete the template and create it again.
- Ask the support to restore it.
- Select Reset template changes in the three-dot menu of the template.
-
A newsletter should reach all active members on Friday at 8:00, but nobody is in the studio at that time. How do you do it?
- Write a single email to each member and send it on Friday.
- Create a serial email with the member filter list and use Schedule sending for Friday at 8:00.
- Save the newsletter as a draft in the Communication center, which sends drafts automatically.
-
You paste the HTML code of a new email design, click Save and see "Required placeholders missing." What is the reason?
- The code lacks ${content.content} or ${footer.unsubscribeLink}.
- The design has no name.
- Email designs can only be created by the support.
Next in the Admin Academy
Previous step: Managing appointments: services, calendar and bookings. Next step: Automating member communication: notification rules, member lists and bulk operations. In it, you you automate this with notification rules, member lists and bulk operations.
Answers
| Question | Answer | Explanation |
|---|---|---|
| 1 | B | The tab Errors holds messages that could not be created or delivered. The status of the row tells you why, for example Insufficient data or Opted out. |
| 2 | C | Messages saved with Save draft stay in the tab Drafts until you send or delete them. The Outbox holds messages that wait for dispatch. |
| 3 | A | Emails are free only if your studio has no usage-based email subscription. With one, each email is charged. The column Price shows the cost per message. |
| 4 | C | Standard characters fit 160 characters into one message. A longer text is split into parts of 153 characters, so 200 characters need 2 messages. With special characters (Unicode) the limits are 70 and 67. |
| 5 | B | The dialog Please activate this app means the channel is not active. Text messages and emails are apps that you activate in the Marketplace. |
| 6 | A | #SalutationFormal inserts a formal greeting that depends on the gender, for example "Dear Mrs". #FirstName inserts only the name, and #SalutationInformal is an informal greeting. |
| 7 | C | System templates cannot be deleted. Reset template changes brings back the original text of the system template. |
| 8 | B | Only serial messages can be scheduled. Schedule sending, in the menu next to Send on the detail page of the serial email, sends it at the chosen date and time. Drafts are never sent automatically. |
| 9 | A | Every email design must contain ${content.content} for the text and ${footer.unsubscribeLink} for the unsubscribe link, which is required in every email. The software checks both before saving: without them, the design is not saved. |
Note: This article was created with the help of artificial intelligence and editorially reviewed.