Notification rules send messages to your members automatically when something happens in the software, member lists collect the members you want to reach, and bulk operations change many member records in one step. In this article you set up all three step by step, from the first notification rule to the first bulk change.
Contents
- Overview
- Prerequisites
- Notification rules and configurations
- Add a notification rule
- Several channels: fallback or parallel
- Activate and share configurations
- Notification overrides
- Create member lists
- Use member lists for messages
- Bulk operations
- Bulk operation examples
- Check your knowledge
- Next in the Admin Academy
- Answers
Overview: from the first rule to the first bulk change
Automatic messages need templates, which hold the text, and notification rules, which decide when a template is sent. Templates are covered in the previous step of the Admin Academy, so this article starts where they exist. The first four steps are set-up work that you do once. The last three you use whenever you want to reach or change a group of members. Each step is described in detail in the section named in it.
Step 1: Understand configurations and rules. Notification rules are collected in a configuration. A rule links one event, for example a member's birthday or a class reminder, with a template and a communication channel. Each studio uses exactly one active configuration. You find out how this fits together in Notification rules and configurations.
Step 2: Add notification rules. For every event that should trigger a message, you add a rule to the configuration: you choose the event, decide whether an employee confirms the message before it is sent or whether it goes out automatically, and pick the channel and the template. See Add a notification rule.
Step 3: Decide how several channels work together. A rule can use more than one channel, for example email first and the app second. In fallback mode the member gets the message through the first channel that works; in parallel mode through every channel that works. See Several channels: fallback or parallel.
Step 4: Activate and share the configuration. A configuration only sends messages once it is active for a studio. You can share one configuration with several studios and activate it in each of them. Optionally, notification overrides send a different template to selected members, for example to members of a certain age. See Activate and share configurations and Notification overrides.
Step 5: Build member lists. A member list is a saved filter, for example all active members older than 18, which updates itself every time you use it. See Create member lists.
Step 6: Use the lists for messages. You send serial messages to one or more member lists, for example a newsletter to all active members. See Use member lists for messages.
Step 7: Change many members at once. With bulk operations you add a note, a bonus period or a rate change to many members in one step. The software always creates a preview first, and nothing changes until you apply it. See Bulk operations and Bulk operation examples.
In the new navigation, Communication and Members are in the sidebar. Depending on your permissions and on how you customized the navigation, your sidebar can look different.
Prerequisites
For the steps in this article, your role needs the following permissions:
| Permission | What you need it for |
|---|---|
| Communication / Manage automatic notifications | Open Communication / Notifications, create and edit configurations, notification rules and notification overrides, and activate configurations |
| Communication / Manage message templates | See the templates you choose in a notification rule, and open Communication / Messages / Serial messages |
| Member management / Lists & Export / Manage member lists | Open Members / Member filter lists, create, edit and delete member lists |
| Finance / General / Perform bulk operations | Open Members / Bulk operations, create previews, apply them and discard them |
| Additional permission of the bulk operation type | Some types need a second permission, for example Change tax rate of contracts for Change tax rate. |
Notification rules and configurations
Many messages follow a fixed event: a member signs a contract, books a class or has a birthday. A notification rule says: when this event happens, send this template through this channel to the member the event is about. The rule has no recipient setting: the message always goes to that member. Members with a communication blacklist receive nothing. You set it on the member overview, in the card Data protection, in the section Communication: open the three-dot menu, select Enable communication blacklist and confirm with Activate. To lift it, select Disable communication blacklist.
Rules are collected in a configuration. A configuration is a named set of rules, for example "Standard rules" or "Rules for the city studios". It can contain one rule per event. Each studio uses exactly one active configuration, so the active configuration decides which automatic messages the studio sends.
Open the notification rules
- Open Communication / Notifications / Notification rules.
- Check the studio in Current facility. The page lists the configurations with their Name. The configuration that is active in your studio carries the badge Active.
- Click a configuration to open it.
Your studio probably already has a configuration from the introduction of the software. Check it before you create a new one.
The rules of a configuration
The page of a configuration shows its name as the heading and lists the rules in a table with the columns Event, Template, Shipping method, Type and Status. Type shows the channels of the rule, and Status shows whether the rule is active. Above the table, the channel chips Email, Letter, Text message and App filter the rules by channel.
Open the three-dot menu of a rule to manage it:
- Activate notification rule or Deactivate notification rule: switches the rule on or off after a confirmation. An inactive rule stays in the configuration.
- Edit notification rule: changes the channels, the templates and the sending options.
- Delete notification rule: removes the rule from the configuration.
Events
The software knows many events. You only need the ones your studio uses. The events fall into these groups:
| Group | Examples of events |
|---|---|
| Membership and contract | New member, Online membership signing, Freeze period with membership extension, Reminder of contract ending |
| Classes and appointments | Internal class booking, Class reminder, Spot booked, Internal appointment booking, No show penalty |
| Leads and trial sessions | New lead (external), Internal trial session booking, Successful trial training |
| Finance | Automatic returned debit, Invoice run, SEPA mandate, Proof of payment |
| Personal occasions and benefits | Birthday, Bonus period ends, Voucher redeemed |
| Self-service | self-service change request received, Online contract cancellation |
Which events you see depends on the modules of your studio: for example, the loyalty events appear only with the loyalty program.
Each event allows its own channels and shipping methods. Birthday, for example, can be sent as a letter, email, text message or app message, but only automatically. Invoice run can only be sent by email. Spot booked can be sent automatically or confirmed before dispatch. The dialog only offers what the event allows, so you cannot choose a wrong combination.
Add a notification rule
Before you add a rule, the template for the event must exist. The template list in the rule only offers templates of the chosen channel that fit the event, so a template for a class booking does not appear for a birthday.
- Open Communication / Notifications / Notification rules and click the configuration.
- Click Add notification rule at the top right. The dialog Create notification rule opens.
- Under Event, search for the event and select it. The list only offers events that do not have a rule in this configuration yet.
- Under Shipping method, choose how the message is sent (see the table below).
- Under Communication, select the channel, for example Email, and under Template the template.
- Optionally, click Add communication channel to add a second channel with its own template. See the section Several channels: fallback or parallel below.
- Decide whether to tick Do not send email to non-confirmed email addresses. The checkbox is shown for every event except Marketing consent. It only matters if the rule uses email.
- Click Save.
- Check the Status of the new rule in the table. If it is not active yet, select Activate notification rule in its three-dot menu.
Shipping method
The Shipping method is a list with two options. It is not a separate checkbox.
| Option | What happens |
|---|---|
| Automatic dispatch without confirmation | Fully automatic. The message is sent without asking anyone. Use it for routine messages, for example birthday greetings or class reminders. |
| Confirmation before dispatch | Semi-automatic. When the event happens in the software, the employee who triggers it is asked whether the member should be notified. Use it for messages you want to check case by case. |
Many events allow only Automatic dispatch without confirmation, because nobody would be there to confirm them, for example Birthday. When an event allows both, for example Spot booked, the dialog suggests a default.
Channels
The channels are Email, Text message, Letter and App. App sends a message to the member app. It is offered only for some events, for example class and appointment events and Birthday. Email, Text message and App are additional features: Email needs the email app, Text message the text message app and App the member app in your package. If a channel is not activated for your studio, the software shows the message Please activate this app and asks you to activate it first.
Change a rule later
With Edit notification rule you change the channels, the templates and the sending options. The Event cannot be changed: the field is locked. To use the template for another event, add a new rule.
Marketing consent
The event Marketing consent sends the confirmation email for the double opt-in, with which a member confirms that they want to receive marketing messages. Its rule has an extra field Select communication channels and no checkbox for non-confirmed email addresses. Available only if the double opt-in is active for your studio.
Several channels: fallback or parallel
Not every member can be reached through every channel. If a rule has more than one channel, you decide how the software uses them. The order of the channels in the dialog is their priority: the first line comes first.
- In the dialog of the rule, select the first channel and its template.
- Click Add communication channel. A second line appears. It only offers the channels the rule does not use yet: if the first line is Email, the second line offers for example Text message or App. Select the channel and its template. If no template of this channel exists for the event, the template list stays empty: create the template first. Repeat for further channels. When the event has no more channels, the software tells you so.
- Under Select sending mode, choose the mode. The field appears as soon as the rule has more than one channel.
| Sending mode | What happens |
|---|---|
| Send communication in fallback mode | The default. The software tries the channels in their order. If the member has no valid contact details for a channel, it uses the next one. The member receives the message once. |
| Send communication in parallel | The software sends the message through every channel for which the member has valid contact details, all at once. The member can receive it several times. |
Example: email first, app second. Your class reminder rule already sends an email. Members without a valid email address should get the reminder in the app instead. Open Edit notification rule, keep Email in the first line, add App with an app template in the second line, and keep Send communication in fallback mode. Members with a valid email address get the email, the others the app message. Nobody gets both.
Non-confirmed email addresses
The dialog shows the checkbox Do not send email to non-confirmed email addresses. It applies to the email channel of the rule. When you tick it, members whose email address is not confirmed get no email. In fallback mode the software then tries the next channel. If email is the only channel, these members get nothing, so the software suggests adding another channel.
Activate and share configurations
A configuration only sends messages in the studios where it is active, and each studio has exactly one active configuration. So you can prepare a new configuration and switch over in one step.
Create a configuration
- Open Communication / Notifications / Notification rules.
- Click Create configuration.
- Enter the name of the configuration in the first input field below Current facility, and optionally a Description.
- Under Edit sharing settings, select the studios that may use the configuration.
- Click Save. The new configuration has no rules yet. Add them as described in the section Add a notification rule above.
Activate a configuration for a studio
- In Current facility, select the studio.
- Open the three-dot menu of the configuration and select Activate for current facility. You find the same action in the menu on the page of the configuration.
- Confirm. The configuration is now active in this studio and replaces the configuration that was active there before.
If several studios should send the same messages, share one configuration with all of them and activate it in each studio. If one studio needs different messages, give it its own configuration.
Edit and delete configurations
With Edit configuration you change the name, the description and the studios it is shared with. Delete configuration is offered only for configurations that are not active. A configuration that is still active in any studio cannot be deleted: first activate another configuration there.
Notification overrides
Sometimes one group of members should get a different text for the same event, for example a welcome for members under 18. A notification override replaces the template of one or more notification rules for the members who match a filter. All other members still get the normal template.
Open Communication / Notifications / Notification overrides. At the top right of the page you find the button Add override and the facility selector Current facility. With Filter, Columns, Sort and Search above the table you find and arrange the overrides. The table lists them with the columns Name, Description, Event, Status and Facilities. As long as no override exists, the page shows the button How it works.
To create an override:
- Click Add override.
- In General information, enter the name and a description, and select the studios. One override can be connected to several notification rules.
- In Filters, add at least one condition, for example Member age, Member home studio, Contract rate, Rate code, Service category or Class name, each with "is" or "is not".
- In Notification rule & new template, select the notification rules you want to override and assign the new template to each of them.
- Check the Overview and create the override.
The override is active as soon as you create it. If you want to keep it as a draft, deactivate it in the three-dot menu of its row. There you also edit, activate or delete overrides.
Create member lists
A member list is a saved filter. You describe which members belong to it, for example "all female members older than 18", and the software finds them. The list is not a fixed snapshot: it is evaluated again every time you open or use it, so new members who match join the list automatically.
Member lists are under Members / Member filter lists. Members / Groups is a different feature: it manages member groups with their own group configuration and is not used for messages.
Open the member lists
Open Members / Member filter lists / Overview. The page shows all saved lists of your studio as cards with their conditions. Click a list to open it.
Create a list
- Select Members / Member filter lists / Create a new list. A new page opens. A bar at the top says that the list is still in draft mode.
- Click the title field at the top and enter the name of the list, for example "Women's Day campaign".
- Click Add to add a filter condition. Select the filter type and its value, for example Age greater 18.
- Add further conditions, for example Gender is Female. Between two conditions you choose and (the member must meet both) or or (one is enough).
- With Add Group you group conditions, for example "pays by Payment method cash or bank transfer" as one group, combined with the other conditions.
- Click Update search results. Above the result table, the software shows how many members match and repeats the conditions. The table below lists the members.
- Click Save. The button stays inactive as long as the list has no name or no condition.
The filter types cover almost everything stored on a member. The list holds many types, sorted alphabetically, for example Age, Gender, Member code and Rate.
Change or delete a list
Open the list, change the conditions, click Update search results and save. To remove a list, select Delete member list in its three-dot menu.
Use member lists for messages
Member lists are the recipients of serial messages, for example a newsletter. Writing and sending serial messages is covered in the previous step of the Admin Academy. Here you see how the list comes in.
From the list
Open the list. At the top you find the actions Create serial letter, Create serial email and Create serial text message, plus an action for serial app messages, whose label contains the name of the member app. The serial message starts with this list as its recipient. The actions for letters and text messages are available only if your studio uses these channels.
From the serial messages
- Open Communication / Messages / Serial messages and start a new serial message, for example with Create serial email.
- Enter a Name.
- Under Recipient list, select one or more member lists. If you select several lists, the message goes to the members of all of them.
- Select the Template and click Next.
- In the step Select customers, check the members and deselect anyone who should not receive the message.
Notification rules do not use member lists: they always write to the member the event is about. Member lists are for messages you start yourself.
Bulk operations
Bulk operations change many members in one step, for example a note for all members of a campaign or a bonus period after a closure. Because they can change hundreds of contracts, they work in two stages: the software first creates a preview, and nothing changes until you apply it.
The bulk operations page
Open Members / Bulk operations. The table lists the bulk operations of your studio with the columns Date, Description, Type, Member list, No. of members and Status. The column Type shows the type together with the action, for example Create Notes. With the filter All types you show only one type.
Create a bulk operation
- Click Create Bulk operations.
- Under Type, select what you want to change, for example Notes. The list is sorted alphabetically. Some types appear only with certain features or permissions.
- Under Action, select Create or Delete. Delete is offered only for some types, for example Bonus period, Freeze period or Consumption credit.
- Click Next. On the second page, select under Selected members how to choose the members: Member list, Upload an Excel file or All members (see the table below). With Member list, select the saved list. If you work with several studios, also check the studio under Facilities. Click Next.
- Fill in the fields of the type, for example the text of a note or the length of a bonus period.
- Check the summary and click Create preview.
You can select the members of a bulk operation in three ways: with a saved member list, with all members, or with an Excel file of member numbers. A saved member list is the usual way: build the list first, check it, then use it here.
| Selected members | When to use it |
|---|---|
| Member list | A saved member list, selected on the second page of the dialog. |
| Upload an Excel file | A file with the member numbers in the first column. The file may have one worksheet only, each column needs a header, and you can skip head lines. Duplicate or invalid numbers and members you have no access to are rejected. |
| All members | Every member of the studio. Not offered for sensitive types such as Archive customer, Member anonymisation, Ordinary cancellation, Extraordinary cancellation, Set memberships residual due and Change contract start date. A few types, for example Change payer IBAN, accept only an Excel file. |
Check the preview, then apply or discard it
The new bulk operation appears in the table with the status Preview. Open it. The page shows Selected members, the number of members (for example 21 / 21) and the status Preview. Check which members are considered and which are not, and why. Then use the buttons on the page or the three-dot menu of the row:
- Apply bulk change: carries out the change for the considered members. The software asks for one last confirmation, which warns that the change cannot be undone.
- Discard preview: cancels the bulk operation. Nothing changes. If the wrong members are in the preview, discard it, correct the list and create a new preview.
Test a new type on a small list first.
Bulk operation examples
The following four types are typical for daily work.
Notes
Adds a note to the profile of every selected member, for example "Received the Christmas voucher". Enter the Note and choose the Level:
- Info: general information.
- Warning: something employees should pay attention to.
- Critical: something that needs action.
Check the text of the note in the preview before you apply it.
Bonus period
Gives the selected members a bonus period, for example free weeks after the studio was closed for renovation. You choose the Type, the length in days, weeks, months or years, the Reason for bonus period and whether the Extension of cancellation period applies.
Change contract start date
Moves the start date and the start of use of contracts, for example when a new studio opens later than planned. You select the Rate and enter the new Membership start date and Start of use. With Move dynamic price adjustments with their end date, planned price adjustments move along. Only active and future contracts are changed. This type is not offered for All members: use a member list or an Excel file.
Apply rate changes to contracts
When you change a rate, existing contracts keep their old settings. This type transfers the contract renewal period and the notice period from the current configuration of the rate to the related contracts. You select the Rate and the Term, and with Only change contract with start date after you limit the change to newer contracts.
Permissions per type
Most types need only Perform bulk operations. Some types check a second permission when you create them, for example Change tax rate of contracts for Change tax rate, Manage access refusal for Access refusal and Payment method for Change payment method. If a type is missing from your list, ask your administrator about the permission.
Check your knowledge
Answer the questions and compare your answers with the answers.
-
Your studio wants to send birthday greetings automatically. Where do you set this up?
- Under Communication / Administration / Templates, in the birthday template
- Under Communication / Notifications / Notification rules, in the active configuration
- Under Members / Member filter lists, with a list of all birthdays
-
The message for the event Spot booked should only go out after an employee has agreed in each case. What do you set in the rule?
- The Shipping method Confirmation before dispatch
- A checkbox "Confirm before dispatch" next to the template
- The sending mode Send communication in parallel
-
Class reminders go out by email. Members without a valid email address should get them in the app instead, but nobody should get both. How do you set up the rule?
- Two separate rules for the same event, one per channel
- App first, Email second, with Send communication in parallel
- Email first, App second, with Send communication in fallback mode
-
You activate a new configuration for your studio. What happens to the configuration that was active before?
- It is no longer active in your studio, because each studio has exactly one active configuration.
- Both configurations send messages until you deactivate the old one.
- Its rules are copied into the new configuration.
-
You want to delete an old configuration, but the software refuses. What is the most likely reason?
- The configuration still contains rules.
- Only the person who created it can delete it.
- The configuration is still active in a studio. Activate another configuration there first.
-
For a Women's Day campaign you need all female members. Where do you build this group?
- Under Members / Groups
- Under Members / Member filter lists, with Create a new list
- Under Communication / Notifications / Notification overrides
-
You created a Notes bulk operation, and the preview shows members who should not get the note. What do you do?
- Apply it and remove the notes from the profiles afterwards.
- Apply it. The software recognizes on its own which members you did not mean.
- Select Discard preview, correct the member list and create a new preview.
-
You received the member numbers of 40 members in a spreadsheet and want to add a note to them. There is no member list for them. What can you do?
- Upload an Excel file with the member numbers in the first column as the selected members.
- Nothing: bulk operations work only with saved member lists.
- Select all members and remove the others after you apply the change.
-
Why does the software create a preview before a bulk operation changes anything?
- So that the change can be scheduled for a later date
- So that you can check which members are affected before you apply the change
- So that the affected members are informed by message first
Next in the Admin Academy
Previous step: Communicating with your members: messages, templates and designs. Next step: Selling at the cash register: cash registers, sales, cash closure and products. In it, you you set up your cash register and products, sell and close the cash register.
Answers
| Question | Answer | Explanation |
|---|---|---|
| 1 | B | Automatic messages are set up as notification rules in a configuration under Communication / Notifications / Notification rules. The template only holds the text, and a member list is for messages you start yourself. |
| 2 | A | Confirmation before dispatch is an option of the Shipping method. There is no separate checkbox for it. |
| 3 | C | In fallback mode the software uses the first channel for which the member has valid contact details, so members with a valid email address get the email and the others the app message. Parallel mode would send both to members who can be reached both ways. One event can have only one rule per configuration. |
| 4 | A | Each studio has exactly one active configuration. Activating a new one replaces the old one in this studio. |
| 5 | C | A configuration that is active in any studio cannot be deleted. Activate another configuration in that studio first. |
| 6 | B | Member lists are saved filters under Members / Member filter lists. Members / Groups manages member groups, a different feature. |
| 7 | C | As long as the bulk operation is a preview, nothing has changed. The preview shows which members are considered, but the software cannot know whom you meant. Discard preview, correct the list and create a new preview. |
| 8 | A | Besides a saved member list and all members, a bulk operation can use an Excel file with the member numbers in the first column. You do not need to build a member list first. |
| 9 | B | The preview shows which members the change affects. Nothing changes until you apply it, so you can still discard the preview and correct the selection. |
Note: This article was created with the help of artificial intelligence and editorially reviewed.