In this article, you will learn how to restore the connection between your devices and the software after switching to a new PC: install the Device Manager software and connect it with the configuration URL from your software.
Contents
- What to do after switching to a new PC
- Install the Device Manager software
- Connect the Device Manager to the software
Quick Guide
- Download and install the Device Manager software on the new PC.
- For Windows 11 with a GAT Writer 6000F: deactivate Core Isolation.
- In the software, open Settings / Access control / Device Manager and select Copy config and reset credentials for your device manager.
- Copy the displayed configuration and enter it in the Device Manager software on the new PC.
What to do after switching to a new PC
If you have switched to a new PC, your devices do not need to be set up again in the software. You only restore the connection of the existing device manager. You need the latest Device Manager software and access to your software.
Install the Device Manager software
Install the Device Manager software on the new PC. It connects the PC with the existing device configuration in your software.
Download:
Download the Device Manager software
Note for Windows 11 users with a GAT Writer 6000F:
The Core Isolation feature must be deactivated for driver updates of this device to work. You can do this later, but it is required for driver updates of the GAT Writer 6000F.
Connect the Device Manager to the software
Important: Only continue if the old device manager is no longer needed. Resetting the credentials disconnects the device manager that is currently working.
- Open Settings / Access control / Device Manager.
- Open the context menu of your device manager and select Copy config and reset credentials. The menu also contains Edit device manager, Remove device manager and Add device.
- Read the warning and confirm with Save.
- The dialog Configure Windows Device manager shows the configuration. Click Copy.
- Start the Device Manager software on the new PC and paste the copied configuration there to finalize the setup.
The configuration is a single link with a token. The dialog does not ask you for a new password.
If you need help with the setup, book an appointment with the support team: How to book an appointment for technical support
Note: This article was created with the help of artificial intelligence and editorially reviewed.